The Truth About Cordless Drill Torque and Speed

In our epic 50+ drill shootout, we found a lot of really capable cordless drills. Want to guess how many perfect ones there are? Zero. Zilch. Nada. None of them are the lightest, most compact, fastest, most powerful, most feature-rich, and best value all in one package. Every product team has to make intentional decisions to prioritize certain aspects along the way. With that in mind, let’s look at the truth about cordless drill torque and speed.


An Inverse Relationship

The first truth about cordless drill torque and speed is that their relationship is inverse. As you increase speed, you have to decrease torque. When you drill in high speed, there’s less torque available. When you drill in low speed, you can access the most torque the drill has to offer.

That’s different from an impact driver that has more power as you increase speed. Read more about the differences here.

Intentionally Slow

Milwaukee M18 FUEL drill LEDWhen you change speeds, you’re mechanically changing gears. The gearing is what determines how fast and powerful each mode is. If you have a brushless drill, there are some electronics that come into play as well.

That’s where each product manager has to make a call. When you’re debating different models, cordless drill torque and speed are the two primary numbers most of us consider and big numbers look great on packaging.

Smaller numbers can actually be better, though. Take Milwaukee’s Gen 3 M18 Fuel model. There’s enough energy to push higher RPMs (Metabo has one that does 3800 RPM!). Milwaukee’s team caps the RPMs knowing full well other drills might be faster on light-load applications.

They channel the extra energy into additional torque at high speed. By doing that, you can drive larger bits in high speed and that ultimately lets you do more jobs in high speed. In fact, you can drive a 2-9/16″ self-feed bit through untreated 2x in high speed with that drill. You might not care if you’re framing, but a plumber working on rough-ins doesn’t have to drop into low speed or grab a Super Hawg to get those holes drilled.

How Do I Choose?

There’s no magic formula to choose between cordless drill torque and speed, but there are some general conclusions we can make.

The torque rating is a standardized test that measures how much torque the drill produces in a very brief moment while it’s locked down. Take a look at the soft torque results in our shootout and you’ll see the order doesn’t match what it is if we just list the printed torque values.

While that complicates things, it’s still a good place to start. Let’s say you’re considering three drills with the following specs:

Drill #1

  • Torque: 1100 in-lbs
  • High-Speed: 2000 RPM
  • Low Speed: 550 RPM

Drill #2

  • Torque: 1150 in-lbs
  • High-Speed: 2100 RPM
  • Low Speed: 450 RPM

Drill #3

  • Torque: 1050 in-lbs
  • High-Speed: 1900 RPM
  • Low Speed: 600 RPM

All three drills are in the same ballpark for torque—we’re not considering a compact drill vs a heavy-duty one. When you look at the high-speed ratings, Drill #2 (2100 RPM) is going to drill the fastest, right?

Under a light load, yes. But Drill #3 (1900 RPM) is going to let you use larger bits without dropping into low speed. Drill #1 (2000 RPM) finds a balance between the two.

It’s a similar story at low speed. Even though Drill #2 (450 RPM) is the slowest, it’s likely going to give you more sustained torque and drive larger bits more effectively. Drill #3 (600 RPM) looks pretty attractive, but it’s going to struggle more with bits that #2 is still steadily plugging away with.

It’s all an intentional gearing decision.


Great Theory, Got Any Real Data?

Editor’s Note: This got geeky in a hurry. Feel free to pick through this data or just skip down to the conclusion.

Here are three drills from our shootout and what they actually did compared to their specifications. I chose them because their measured soft torque numbers are in the same ballpark with each other.

DeWalt DCD997

  • Listed Torque: 841 in-lbs
  • Measured Soft Torque: 618.8 in-lbs
  • No-Load High Speed: 2014 RPM
  • High-Speed Drilling Result: 1906 RPM
  • No-Load Low Speed: 457 RPM
  • Low-Speed Drilling Result: 433 RPM

Makita XPH07

  • Listed Torque: 1090 in-lbs
  • Measured Soft Torque: 585.6 in-lbs
  • No-Load High Speed: 2147 RPM
  • High-Speed Drilling Result: 1646 RPM
  • No-Load Low Speed: 550 RPM
  • Low-Speed Drilling Result: 474 RPM

Ridgid R8611506

  • Listed Torque: 1300 in-lbs
  • Measured Soft Torque: 615.6 in-lbs
  • No-Load High Speed: 2000 RPM
  • High-Speed Drilling Result: 1621 RPM
  • No-Load Low Speed: 547 RPM
  • Low-Speed Drilling Result: 437 RPM

Ridgid Octane Hammer DrillThe results don’t line up as nicely as the theoretical section above but there is a clear takeaway. DeWalt has the slowest no-load speeds in both high and low gears along with the highest measured torque (it’s specced torque is actually significantly lower than the other two).

Notice how much higher DeWalt’s efficiency (percent of no-load speed) is. The other two drills are starting to slow down under these loads, but DeWalt still has more left to give. By giving up a little top-end speed in both modes, it’s able to handle these larger bits more easily.

Ridgid helps make this point. Even though it’s 100 RPM faster in low, it’s only 4 RPM faster with that 2-9/16″ bit.

Make the Call

Looking at the data on a broader level, it doesn’t all work out that nicely and there’s a lot we can’t explain (like why a drill with 841 in-lbs of torque posts more soft torque than one with 1090 in-lbs). It’s tough to take different manufacturers with different motors, batteries, and electronics and then say with absolute authority which one you should buy.

The way to choose between cordless drill torque and speed is to take an honest look at the work you do. If you’re a plumber or electrician, you’re drilling larger holes more frequently. Giving up some top-end speed for a drill that lets you work at high speed for more bit sizes makes sense.

If you’re working mainly with twist bits and smaller spade bits/hole saws, having a higher top end speed makes sense.

But here’s the thing—all three of our example drills can do the same work. They all have enough torque muscle to keep driving the same bits. It’s just a matter of how hard the drill has to work in each gear.

At the end of the day, pick a battery platform that has all of the tools you need at a price that fits your budget with the quality you expect. If you start there, they’ll have a cordless drill that fits your needs.

Leave a Comment

Your email address will not be published. Required fields are marked *

Want me to write short stories about your recipes?

I would Love to. Just send me a message.

Subscribe for newsletter

Join Our 203,849 Subscribers

A peep at some distant orb has power to raise and purify our thoughts like a strain of sacred music, or a noble picture, or a passage from the grander poets. It always does one good.

I only send really good stuff occasionally. Promise.

Scroll to Top